Many households think they can get away with not cleaning their machines. They believe they should only buy the product and not check it until something goes wrong. They wait for the signs to get worse, and then they try to fix it. If the problem does not go away, then calling a professional is in order. Calling a professional can cost you a lot of money, especially in times when you have waited a long time to repair your machine. Sometimes it's better just to get a new one.

Some people do not get the grasp and importance of regular maintenance and cleaning. A lot of household items have a guarantee for about 5 years maximum. If anything goes wrong during that time, you do not have to pay anything. However, it seems like most of them break down immediately after the guarantee wears off. That is most likely due to improper care. If you want to read more about how to clean the boiler tube yourself, click here https://www.doityourself.com/stry/how-to-clean-boiler-tubes.

The Importance of Cleaning your Boiler Tube

If you know something about boilers and their tubes, you know that after some time particles start to build up in the pipes. This is due to people using them often. These particles can build sediments which begin to act as a shield. They shield the water from getting heated. So, it has to work more to get the water heated. It would need more fuel to heat the water at the temperature it required previously. This is inefficient and costly. It will ultimately end in total failure of the whole system.

To save more money, you should regularly clean your boiler tube. Plumbers can’t stress enough the importance of regular maintenance. Nowadays, there are many types and methods to clean your them. There are many products you can buy to help you or you can try to do it yourself. It all depends on what you prefer.

Air-driven Automatic Systems

Systems that work on air compression to clean out your boiler tubes are gaining more popularity each day. Before using them, you should clean out the pipes of any extreme build-ups. If you don't do this, the tool can easily be damaged. After that, you just place the device near the tube, and it does the cleaning all by itself. It is meant to be used every 3 to 6 weeks. It will work perfectly if the brushes are larger than the tube. You should measure the diameter of the tube before choosing the right brush.

When you are using this boiler tube cleaner, you should make sure you are using it the right way. There are many videos online. Be sure to check them all out and read the manual before using it. The best thing about using air-driven cleaning systems is that they do all the cleaning by themselves. You just place it inside the tube. You mustn’t push it, because you may damage it. It moves inside on its own. There is no need for you do to any tedious work.

You should put a few drops of oil inside the compressed air connection after each cleaning session. By doing this, you protect the tool from corrosion. Each unit has to be cleaned at least once per year. You have to take care of the tool to keep your boiler safe. You can also have a supply of some new brushes ready to use. They can wear off after some time.

Acoustic Cleaning

This is another method of cleaning your boiler tube. This method involves using acoustic energy to clean your tubes from ash. It will not harm your tubes. It works best on deposits that are already dry. Acoustic cleaning is done by installing acoustic horns on the boiler. You should know that you do not have to turn off your boiler beforehand. It means the cleaning is done online. A lot of cleaning methods demand to turn off the boiler first before cleaning. This method doesn’t require that.

Water Lances

Water lances use high – pressured water jets to clean your boiler tubes. This method is useful in cases where the acoustic cleaning is not. This is because water lances can clean off both dry ash as well as slag. However, you should be careful in using it. It is not recommended for you to spray your working boiler with water to clean it. Most boilers will likely fail. It all depends on the type of boiler you are using. So, you should leave it to the professionals before you cause any damage to your boiler.

Soot Blowers

Soot blowers are cleaning tools which use compressed steam, water, or air to clean off the slag. They have been around for a while now. It is important to note that you do not have to turn off your boiler before using the blower. It works only when necessary. It is called an intelligent soot blower. It knows what strength to use to clean certain types of soot build-up. So, it keeps your tubes safe from erosion.

If not cleaned properly, soot can easily make a fire. It can further develop into hotspots inside the tube. These hotspots weaken the tube and eventually lead your boiler to its doom. The removed soot can be blown out or trapped inside the soot collector. Some boilers may have soot blowers inside. However, if your boiler doesn’t have one, you could install it later.

Explosives

You may be turned off by the name, but don’t be. It has been around for quite some time. It is very time – efficient and convenient. It will quickly clean the tubes without causing any damage to the pipes. You have to turn off your boiler before using explosives. It is most often used in countries and places where every drop of water counts. You do not have to use water to clean your tubes. Dynamite is commonly used in this method.