Every homeowner should consider rethinking the amount of energy they currently use in their home. There are two major motives for conserving energy. The first one is to save money on expensive utility bills, and the second is to help protect the integrity of the earth. Tactics for energy conservation range from adjusting at-home behavior to investing in specific home improvements. There are a variety of ways that homeowners can achieve both goals and using these five strategies can be a great place to start.
A solid starting point to saving as much energy as possible is a bit less complex than you may think. Saving energy is as simple as turning off lights and appliances when they’re not in use. FOr example, rather than using your dishwasher, wash your dishes by hand or, if you don’t want to use your dryer, hang your clothes on a rack to dry naturally.
In terms of saving the most money on utilities, consider the seasonal impact on your energy usage. On average, almost half of a home’s utility bills are directly impacted by heating and cooling costs. Attempting to turn down the heat on your thermostat in the winter and using your air conditioner less in the summer will create the most beneficial results.
A relatively simple way to save energy within your home is to replace light bulbs that use more energy. Homeowners must realize that the traditional incandescent light bulbs consume an excessive amount of electricity and must be replaced more often than their energy-efficient counterparts. Energy-saving bulbs might be a bit more expensive when purchasing, but will last longer saving you money in the long term.
Smart power strips can also be a great way for homeowners to regulate how much power they’re using especially when these household electronics are not being used. Electricity in standby mode is considered to be a major source of wasted energy. These advanced power strips can eliminate the problem by shutting off the power to electronics when they are not in use.
A major way to save money on utilities and simultaneously protect the environment is to invest in appliances that are energy efficient. In terms of total household energy usage, appliances are responsible for approximately 13%. The two most important things to consider when choosing appliances are the initial purchasing price and the annual operating costs.
A good savings tip when purchasing an energy efficient appliance is to look for the ENERGY STAR label. This label is a federal guarantee that the appliance will consume less energy during use and on standby than standard models. In order to save even more money in the long term, using a home warranty can relieve stress from homeowners who worry about the lifespan of certain appliances after purchase. If you want to ensure these types of purchases stand the test of time, this could be a great option to use to your benefit.
An often overlooked way to save energy in your home is to install energy efficient windows where deemed necessary. Oftentimes, single-paned windows that are not replaced by double-paned windows can result in a higher heating bill. The location of your home directly impacts which windows you choose to replace.
For homeowners in colder regions, windows with “low-e” coatings can prevent warm air from exiting through your windows. On the other hand, in warmer regions they can keep warm air from entering the home. Windows with low-e coatings can reduce heat gain by reflecting more light and lowering the amount of thermal energy that enters your home. In fact, low-e interior or exterior storm windows can save you 12%–33% on heating and cooling costs.
Insulating your home can play a major role in saving energy. The amount of insulation you should install depends on which area of your home you are working in. The five main areas for insulation implementation are your walls, attic, floors, basement, and crawl spaces.
This process helps retain heat during the winter and keeps heat out of your home during the summer. Much like the previous tips, your insulation depends on where you live. The recommended level of heat resistance in colder regions will be different than those in warmer regions.
Conserving energy can be valuable for many reasons. By using energy efficient methods not only will you save money and increase your property profitability, but you will be protecting the environment at the same time.