Sunday, October 17, 2021
Home Construction Building Materials 5 Window Tips for Post Construction Window Cleaning

5 Window Tips for Post Construction Window Cleaning

Even if they are just windows, cleaning them will not be easy, especially if it’s post-construction. Window cleaning after a renovation or any construction is not like a regular cleaning session, swiping up and down; it’s a specialised job. With paint, plaster and other materials used on your panels, simple washing and drying out won’t always work on newly installed windows. And don’t forget the danger of dealing with glass panes.

Some contractors are kind enough to make sure that windows are sparkling clean before the client moves in. However, this is not always the case. You might have to take care of the dirt and streaks by yourself. To help you deal with the mess, here are five window tips for post-construction window cleaning.

1. Use the right tools.

The least abrasive tool for cleaning windows is a squeegee. It’s easy to use and quickly achieve results. But new windows may need more than a squeegee. Silicone, plaster, paint and cement are construction materials that are difficult to remove. Standard cleaning tools and methods like paper towelling won’t be practical on them.

Some of the specialised tools to avoid scratches on windows while cleaning include the stainless steel scraper blades, glass scraper, fine-grade steel wool, scratch-free scrubber pads and some chemicals to remove dried concrete and sticker residue. Using the correct tools will help you save money and avoid causing damage to the new windows. It can also lessen the amount of time to be spent on cleaning and the effort required to get the cleaning job done.

2. Use detergents as a cleaning solution.

Dishwashing detergents are good cleaning solutions to use with squeegees. Having a generous amount in a bucket of water can give you results already, especially when the dirt has built up. Detergents are a surfactant that creates a very thin layer of protection between the glass surface being cleaned and the cleaning tool. If a metal scraper blade is used, detergents will allow the blades to slide smoothly across the glass.

3. Use a microfiber cloth.

One of the safest and most cost-effective ways of cleaning window mirrors is the use of microfibre cloths. They work better than a newspaper or a paper towel, cleaning your windows well and leaving them clear and streak-free. Microfiber cloths are absorbent and soft. They can hold moisture that’s eight times their weight, and their tiny fibres are appropriate for delicate glass surfaces. They are sure to pose no risk of scratch on your windows when cleaning, and they can be washed and reused. You can use them more than once. This means fewer expenses on cleaning materials and saving on what’s more essential.

Microfibre cloths can be used to apply cleaning solutions to the windows, scrub them clean and then wipe them dry. However, other high-quality fibre cloths may not need any cleaning solution as they clean well by themselves already.

4. Remove the dust and dirt first.

Construction typically leaves a thick layer of dust and dirt. This is generated when the workers cut and sand the wood framework or sand off the drywall before painting it. Before you get started cleaning and to get your windows easily cleaned up, you must take them out first. Brush or vacuum this dirt and dust from the window frames so that they won’t settle in your frames after cleaning or turn into a muddy mess when mixed with your cleaning solution.

Additionally, the dust and debris on your windows after construction should be removed first because they are not like the typical household dust. They have wood and drywall remnants and are much thicker and abrasive. Rubbing them off with a cloth can scratch the glass while removing them with a wet rag during cleaning can leave streaks.

For shades and blinds, a microfibre duster can be used to dust them off or the slates can be opened and cleaned individually with a damp cloth, followed by a dry one.

5. Hire a cleaning service.

If you don’t want a fuss with your window, hire a professional window cleaner. Many companies offer their service of window cleaning in Northern Beaches. They can quickly clean your windows with minimal effort because they have the right tools and equipment, and they are trained for it. Considering the danger of cleaning windows on a ladder and the hassle, calling a professional is a better way.

What are other reasons why you should hire a professional window cleaner? Expertise and specialised tools are needed to clean after a build, and these professionals have them. If cleaning on your own, you might cause a large scratch on the glass and ruin that expensive piece. A professional cleaner won’t do that; they know what scratches the glass and what does not. Simply, they know what they are doing. They are experienced in it and can clean your windows spot on.


Thomas P
I believe in making the impossible possible because there’s no fun in giving up. Travel, design, fashion and current trends in the field of industrial construction are topics that I enjoy writing about.


Please enter your comment!
Please enter your name here


Must Read



Connect with Us!