Is your furnace in good working order? Homeowners are highly recommended to check the condition of their heating units before the winter season to avoid unexpected defects when the weather becomes freezing cold.
The worst nightmare of every homeowner is to cope with a faulty furnace in the middle of winter. Therefore, you should keep an eye on the signs that indicate a problem, such as unusual odors, gas leaks, weird sounds, inadequate heating, high energy bills, etc.
These are the most important signs of furnace repair that homeowners should pay attention to.
A common sign for homeowners in Dayton to be aware of, which indicates a furnace needs repair, is the presence of an unusual smell. Even though it’s normal for these units to smell like fuel when used for the first time in the winter season, the pungent smell usually dissipates once they start running.
Nevertheless, if the furnace keeps on smelling like fuel throughout the season or a strange scent appears unexpectedly, there might be an issue with the unit. The odor originating from the exhaust can result from a gas leak or be caused by excessive dust inside the device.
While carbon monoxide is odorless, homeowners can sense aldehydes, which is a bad combustion byproduct. Anyhow, if you suspect an unusual smell, don’t hesitate to contact heating repair professionals to determine the origin and come up with a proper solution.
Another sign that your furnace needs repair is the presence of a gas leak. Even if you aren’t certain that you are dealing with such a leak, you should definitely be precautious. Make sure to contact a professional right away and ask him/her to come to your house as soon as possible. In the meantime, you should take some necessary precautions to avoid serious consequences.
For instance, given the highly flammable nature of gas, the best decision would be to turn the unit off immediately. Keep in mind that a single spark is more than enough to cause a disaster. Also, you are advised to leave the house until a technician addresses the leak or verifies there is no such leak present. Check out the physical symptoms of a gas leak in your household.
Inadequate heating throughout the house is another unmistakable sign your furnace isn’t performing its job correctly. There is supposed to be a consistent temperature, not hot and cold patches in different areas of the house. Nevertheless, homeowners should know that it’s normal for some home areas to differ slightly in temperature. For example, the basement is likely to be cooler when compared to the upstairs.
A radical change in temperature, however, is not usual. There are multiple causes why your furnace might be producing an insufficient amount of heat, such as a blocked filter, a clogged burner, a faulty motor, or a defective thermostat. Additionally, inadequate heat might result from leaking ductwork, as it allows the air to escape. If the thermostat seems to cause no trouble, you should call a repair technician to find the root of the problem.
Difficulties when starting the unit
Residents of Dayton, Ohio, should consider hiring repair services if experiencing difficulties upon starting their furnaces. Wear and tear is the most common cause of this issue, as when heaters become older, they require more maintenance. Unless these devices are provided with proper maintenance, homeowners are likely to experience trouble turning them on or keeping them running.
If your furnace requires a couple of attempts to start, or it has to be restarted multiple times during a day, then it definitely requires repair. Apart from old age, such an issue usually stems from dirty indoor coils or filters, disconnected wires, or secondary heat exchangers. The best decision is to contact professional repairmen to determine the cause and resolve the problem.
Carbon monoxide alarm alert
Another important sign that homeowners in Dayton aren’t supposed to miss is the appearance of a carbon monoxide alarm alert. If this alarm goes off, it means you are coping with a dangerous problem, which requires immediate attention. Carbon monoxide is lethal, odorless, and colorless. Therefore, alarm alerts are the most effective way of detecting carbon monoxide presence.
In most cases, a damaged heat exchanger is a cause of leaking gas into the house. Once the detector goes off, homeowners are encouraged to switch the furnace off, open the windows, and evacuate their homes. The longer a person is exposed to carbon monoxide, the higher the chances of experiencing weakness, dizziness, vomiting, upset stomach, and chest pain. Make sure to evacuate the house before any of these symptoms become evident.
Apart from strange odors, furnaces might show symptoms of malfunction by producing weird sounds. While it’s normal for these units to produce a whirring sound, this noise indicates the unit is working properly. Nevertheless, some sounds are considered strange and improper, such as rattling, squalling, whistling, banging, irregular hums, groaning, etc.
If you hear any of these noises, it’s time to contact a heating repair professional. Each sound indicates a specific issue, which is why you should describe the sound to the technician. For instance, whistling and squealing noises might be caused by problems with the belt or fan. In contrast, groaning or banging usually result from loose or broken internal components.
Higher energy bills
Another potential sign of furnace problems is the increase in energy bills. While it’s common for bills to fluctuate in accordance with the season, a sudden increase could be an indicator of a faulty heating unit. The trend doesn’t have to be sudden, as it might also happen gradually over a period of several months. If your energy bills keep on growing each month, you should get in touch with a professional to take a look at the unit.
The bottom line
Upon noticing any of these signs, don’t hesitate to hire professional assistance.
It’s worth it!