A leaking roof is a serious issue. This is not something to be taken lightly, because a minor roof can result in serious damage. You need to take immediate measures to counter the threat as soon as possible. But you may not always get help in time. Though it’s best to call professionals such as Leaking Roof Repairs Brisbane to get top-notch service, just follow these 8 simple tips to minimize your damages until your hired experts are able to fix or install a new roof.

1. Try To Minimize Interior Damage
The first thing you need to do is minimize the damage to the interior of your home. Rearrange the furniture, remove valuable items or important documents from that area, cover the floor and walls with waterproof materials so that the surface stays dry. But first soak up the water from the floor before covering the area with waterproof coverings, otherwise the trapped moisture will make the room smelly. You can apply a plastic barrier to the wall if the water is dripping down on an interior wall. If you encounter ceiling dipping or bulging as though it is full of water, you need to protect the surrounding area properly. Poke a small hole in the ceiling to release the leak, it will minimize the further damage to the surrounding wall. Take a bucket or container with protective plastic to catch the falling water and don’t leave it unattended for too long.
Funnel
2. Redirect Leaking Water Process
If you don’t want to deal with buckets and containers every 2 hours, a bottle of funnel will do just the trick for you. It can redirect the water outside. This process only can be used inside your home where the leak is coming from above. To create such a funnel, take a large bottle or plastic jugs and cut it in half in a way to have a wide opening end and the bottleneck on the other.Take a hose which should be long enough to reach from the location of the roof leak to nearest exit point. Attach one end of the hose to the bottleneck using duct tape or similar strong adhesive to the end of the funnel. Then place the wide end of the funnel over the leak and attach it properly. You can position the other end of the hose to the exit point of the door, this way the water will travel through the funnel safely out of your house.
3. Go Through the Attic or Crawlspace
Grab a flashlight and check out if you have access to an attic or crawlspace. Just observe where it appears in the ceiling below, based on it you can track the leak. But the water traveling from a leaking roof can be deceptive sometimes. This escape route is usually a weak spot in the roof’s drywall or the opening for a fixture, such as a vent or ceiling lamp. This makes finding the cause of a roofing leak in the roof itself difficult, even if you find where the water appears to be entering the attic or crawlspace. But this step can still help you better pinpoint where the water is entering the home. It also gives you the opportunity to create another barrier to stop the water from reaching the ceiling. To create the barrier, first lay a piece of plywood across the joists within your attic or crawlspace, and place a large bucket on top to catch dripping water. Don’t place the bucket directly on the drywall between joists, as it may break through the drywall when it fills with water. Remember to go up regularly to empty the water.
4. Search for The Causes of Your Roof Leak
Check onto your roof for the sources of the leak if you are feeling confident and up for it. It’d be wise to fix the leaking roof from ground level if you have a steeply-sloped high-up roof. It may not look like much of a solution, but you may find your leaking roof issues in the roof. Investigate the problems yourself with proper equipment to ensure safety before the experts arrive.
5. Examine from a Distance
After you’ve temporarily minimized the damage to your home’s interior, including the attic or crawlspace, it is finally time to take a good look at the roof from outside of your home. Tracing the source of a leak from the point in the ceiling where water comes through can be difficult. Examining the roof itself can help you connect the dots. You may be able to identify potential problems from close up, or you may need to step back and look at the whole roof. This is easier and more effective for sloped roofs, since it can be difficult to see the top of your flat roof from the ground.
6. Put Away Fallen Tree Limbs
Carefully remove the debris while paying attention to the potential damage underneath if you see large fallen tree limbs. You need to thoroughly cover the damaged area caused by the fallen tree limb. Some debris may seem very hard to remove, better leave it for the professionals. Just try to cover the damaged area to prevent further water from entering the house.
7. Sweep Away and Soak Up Standing Water
Carefully sweep the water downwards off the roof if you find an area or several areas of pooling or standing water on your flat roof. Do not forget to use a soft broom and also do not sweep too much roughly, especially if you have a flat roof that can be easily damaged by scratching and gouging. Also do not forget to not step or put unnecessary pressure on the pooled water area because it may be weakened. To further minimize potential water damage, try using a mop or towels to soak up any remaining pooled water.
8. Follow The Safety Rules
Do not forget to review and follow the rooftop safety tips before going up on your roof and taking matters in your hand. Do what you can to minimize the water leakage from the inside and ground level until professionals such as Brisbane roofers come to save your day.