Why your Washing Machine Keeps Overflowing and How to Fix It

September 6, 2022

Several difficulties can lead to water pooling around your washing machine, which can then cause structural damage. You'll find specific instructions for finding and fixing the issue at hand here.

If your washing machine is overflowing with laundry drain, the problem could be as simple as a clogged drainpipe or as complex as a clog in the main sewer line. When an overflow occurs in your home, it's crucial to take prompt action, even if it means calling a plumber, to prevent costly structural damage.

The Mechanics of a Washing Machine's Drain

It's crucial to know how a washer drains water during a wash cycle to identify the root reasons for overflowing drains.

Your washing machine has a pump that removes water from the tub at the end of the cycle, sending it down a drain hose that winds its way out of the machine and up to the standpipe near your hot and cold water supply valves. Water from the washing machine flows through the hose and into the standpipe, and from there, it is taken to the main sewage line in your home if everything is working properly.

There is a risk of washing machine overflow if any part of the drainage process breaks, so it's important to check for and fix such problems as soon as possible.

Fixing a Clogged Drain: How to Find the Root of the Problem

You must first determine if the problem is indeed the washer's drain line. Most washing machines will require a diagnostic test, though more complex models may use signal errors to pinpoint the source of a leak.

Begin by initiating a drain cycle in your washing machine. As the washing machine fills the hoses and the standpipe with water, make sure you keep an eye on it. The problem probably lies in the washer's drain if water is rising from the floor and exiting the standpipe.

The location of the clog can be determined by timing how long it takes for the standpipe to fill up and overflow. A possible interpretation of the various periods follows:

  • If the pipe fills and overflows within a matter of seconds, the blockage is likely to be near the surface of the standpipe or in a hose connected to a washing machine. If the obstruction is tiny enough, a manually controlled snake could be all that's needed to get through it.
  • If the water doesn't come to the surface for at least 30 seconds, the clog is likely further down the drainpipe. If the clog is located far back in the pipe, you may need a long drain snake to reach back there and remove it. If you've tried using a snake but haven't been able to clear the blockage, calling a plumber for advice is your next best option.
  • When water takes more than a minute to overflow after entering the drainage pipe, a more serious obstruction may have occurred. Get in touch with a professional plumber to examine your home's sewage lines and determine the cause of the problem.

Remember that if you see a leak in the washing machine, you must immediately stop the cycle.

Overflowing drains aren't always caused by obstructions. Overflows can also be caused by hoses that are kinked or drain pipes that are too small. Get a professional plumber's opinion if you want to know for sure what's wrong.

Methods for Using a Drain Snake

Here's how to control a snake:

  • To use, insert its end into the drain and then rotate the drum's handle.
  • If you don't feel any resistance, keep jamming the snake's head further into the pipe.
  • Turn the snake either clockwise or counterclockwise until you feel the blockage release.
  • After removing the snake, run another drain cycle to make sure the pipe is clear and can drain normally.

The Ultimate Guide to Stopping a Clogged Drain

Take these precautions to lessen the possibility of a washing machine drain overflow:

  • If you don't want lint to accumulate excessively in your drains, use a lint roller or garment bag whenever possible.
  • Check and clean the lint trap or filter in your washing machine if you can.
  • Leave at least 0.5 in. of clearance between the drain and the discharge hose for optimal drainage.
  • To avoid soap accumulation, use the appropriate detergent.
  • Maintain the cleanliness of your washing machine by routinely cleaning its hoses and drain.

FAQs: Answers to Your Burning Questions

What could be causing my washing machine to continually drain?

If your washer empties before it's filled, check to see if the drain line is pushed into the standpipe; there should be some wiggle room. You should also ensure that the kink in the drain pipe is not lower than the washer. Once the hose is in place, zip ties can be used to keep it from moving.

Why does the drain in my washing machine overflow?

A clogged drain hose or standpipe is usually responsible for an overflowing toilet.

When using Drano, is it OK to pour it down the drain of a washing machine?

Yes. If your washing machine drain is clogged, you can use Drano or another drain cleaner to have it unclogged, but first, you should run your washer without any clothes in it.

 

Categories:  

Leave a Reply

Your email address will not be published.

Thomas P
I believe in making the impossible possible because there’s no fun in giving up. Travel, design, fashion and current trends in the field of industrial construction are topics that I enjoy writing about.

LEGAL

Welcome to Urban Splatter, the blog about eccentric luxury real estate and celebrity houses for the inquisitive fans interested in lifestyle and design. Also find the latest architecture, construction, home improvement and travel posts.

SHOPPING

linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram