In an industrial setting, circular saw blades are essential tools for woodworking. However, just like any other piece of equipment, they can get dull over time and hamper the quality of your cuts. To increase their lifespan, you’ve got to sharpen and maintain them regularly.
In this blog, I will show you how to sharpen and maintain your Dress circular saw blades in easy steps.
Why You Should Sharpen and Maintain Your Circular Saw Blades
- A dull blade can cause rough cuts, overheating, kickbacks, and damage to your material and saw.
- A sharp blade can cut accurately, and reduce the risk of accidents and injuries.
- Sharpening and maintaining your circular saw blades can save you money and time by avoiding frequent blade replacements.
How to Sharpen Your Circular Saw Blades
There are different types of circular saw blades, such as masonry blades and carbide-tipped blades. Masonry blades are cheaper and mainly used for cutting concrete blocks, while carbide-tipped blades are more expensive and versatile, and can cut almost anything. Depending on the type of blade you have, you may need different tools and methods to sharpen it. Here are some general steps to sharpen your circular saw blades:
- Remove the blade from the saw and clean it with a brush or cloth to remove any dust, dirt, or resin.
- Secure the blade on a bench vise or a clamp, and mark the first tooth with a marker or a piece of tape to know where to start and stop.
- Use a sharpening stone, a diamond file, or sandpaper to sharpen the face and the sides of each tooth. Keep the tool at the correct angle (usually about 30 degrees) and apply even pressure. Do not over-sharpen or round off the edges of the teeth.
- Sharpen all the teeth in the same direction and check for consistency and sharpness. You can use a magnifying glass or a flashlight to inspect the teeth more closely.
- Reattach the blade to the saw and test it on a piece of scrap wood. If it cuts cleanly and smoothly, you have successfully sharpened your circular saw blade.
How to Maintain Your Circular Saw Blades
Besides sharpening, you also need to maintain your circular saw blades regularly to keep them in good condition. Here are some tips to maintain your circular saw blades:
- Clean your blades after each use with a brush or cloth, and occasionally with a solvent or a blade cleaner to remove any stubborn residue.
- Store your blades in a dry and cool place, and protect them from moisture, rust, and dust. You can use a blade case, a cardboard box, or a plastic bag to store your blades.
- Check your blades for any cracks, chips, bends, or missing teeth before using them. If you find any damage, do not use the blade and replace it with a new one.
- Align your blade properly with the saw, and adjust the depth and angle according to your material and project. A misaligned blade can cause uneven cuts, vibrations, and wear and tear.
- Use the right blade for the right material and project. Different blades have different sizes, shapes, and numbers of teeth, and are designed for different purposes. Using the wrong blade can damage your blade and your material, and compromise the quality of your cuts.
Where to Find Circular Saw Blades
If you want high-quality Metal Cutting Saw Blades in Saudi Arabia, SFTC is the supplier to go with. They offer a ton of industrial tools and equipment, such as plasma cutters, band saw blades, etc.
Contact SFTC today!